Before mixing grout for your tiles, you need to know how to use the correct additives. They can help you achieve the extended feature of normal grout such as being more stronger, durable and warter resistant. You can adjust the pigment amount to match your desired shade. After the grout dries, it will appear lighter than the color you chose when it was wet. To achieve a glitter or glow-in-the-dark effect, you can add extra pigments.

You can choose between epoxy Grout & Admix. You can also opt for colored grout or tile release. These products will work well together with most cement-based grouts. Once mixed, you'll be able to grout tiles easily and with maximum durability. These products can be used in service areas as well, as they are completely stain-resistant. For more information, read the following:

Use mixing equipment if possible. The Grout Admix helps you easily mix the grout with equal parts. It's crucial to note that grout shouldn't be over-mixed because it can discolor some tiles or stones. Before applying the grout to bigger areas, test it on a tiny area. To ensure that the tile is thoroughly bedded, use the right-sized notched trowel while applying the grout. Back butter the tile if it's a big one for extra support. To embed the tiles, you can alternatively use a rubber mallet.

Remember to follow the manufacturer's directions to the letter when mixing grout. The consistency of the mixture should resemble peanut butter and not drip from the trowel when you lift it. Make sure you use a mixing tool that is slow enough to avoid air bubbles but quick enough not to leave any space for water. Also, keep in mind that a thin grout is likely to crack and shrink, so it is vital to avoid putting too much water in the grout.

Before tiling, you should decide whether you want to use sanded grout or unsanded grout. Grout tends to stick to the joints, and you'll need to push the material deeply into the joints before it dries. The latter option is recommended if the joints are already cracked and risk collapsing. When using unsanded grout, seal it after it dries, as it is more difficult to apply and has a greater chance of shrinking.

When using grout, make sure you don't use it on seams wider than an eighth-inch. Grout can scratch polished tile and stone. However, it won't scratch matte-finish tile or stone. Since sanded grout contains tiny mineral particles, it won't scratch matte surfaces. However, if you're using unsanded grout for your tiles, you may want to use sanded grout for narrow seams.